home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
IRIX Patches 1995 March
/
SGI IRIX Patches 1995 Mar.iso
/
relnotes
/
patchSG0000247
/
ch1.z
/
ch1
Wrap
Text File
|
1995-03-10
|
5KB
|
199 lines
- 1 -
1. _P_a_t_c_h__S_G_0_0_0_0_2_4_7__R_e_l_e_a_s_e__N_o_t_e
This release note describes patch SG0000247 to IRIX 5.2
1.1 _S_u_p_p_o_r_t_e_d__H_a_r_d_w_a_r_e__P_l_a_t_f_o_r_m_s
This patch contains a bug fix for all platforms.
1.2 _S_u_p_p_o_r_t_e_d__S_o_f_t_w_a_r_e__P_l_a_t_f_o_r_m_s
This patch contains a bug fixed strip(1) for machines with
the Development Option. Installing it on other machines is
harmless but generally useless.
1.3 _B_u_g_s__F_i_x_e_d__b_y__P_a_t_c_h__S_G_0_0_0_0_2_4_7
This patch contains fixes for the following bugs in IRIX
5.2. Bug numbers from Silicon Graphics bug tracking system
are included for reference.
+o The strip(1) program failed to notice that information
in the line table was placed incorrectly by 5.2 ld(1)
and as a result the line table was not stripped out.
This was incident/bug number 249682.
Leaving the line table in place did not cause incorrect
execution but it did waste disk space (the line table
could not be found or used by any program, so leaving
it served no purpose).
This new version of strip fixes the problem by ensuring
that the strip program does indeed strip the entire
debugging-information (the .mdebug section) including
the line table.
The amount of disk space saved by using this new
version of strip is typically 5% of the space of the
stripped object.
It is quite useless to try to use this on an already-
stripped object: wasted line table space in those
cannot be recovered.
1.4 _S_u_b_s_y_s_t_e_m_s__I_n_c_l_u_d_e_d__i_n__P_a_t_c_h__S_G_0_0_0_2_4_7
This patch release includes these subsystems:
+o patchSG0000247.compiler_dev_sw.util
- 2 -
1.5 _I_n_s_t_a_l_l_a_t_i_o_n__I_n_s_t_r_u_c_t_i_o_n_s
Because you want to install patches for only the problems
you have encountered, patch software is not installed by
default. After reading the descriptions of the bugs fixed in
this patch, determine the patches that meet your specific
needs.
Patch software is installed like any other Silicon Graphics
software product. Follow the instructions in your _I_R_I_S
_S_o_f_t_w_a_r_e _I_n_s_t_a_l_l_a_t_i_o_n _G_u_i_d_e to bring up the miniroot form of
the software installation tools.
Follow these steps to select a patch for installation:
1. At the Inst>prompt, type
iiiinnnnssssttttaaaallllllll ppppaaaattttcccchhhhSSSSGGGG_x_x_x_x_x_x_x
where _x_x_x_x_x_x_x is the patch number.
2. Select the desired patches for installation.
3. Initiate the installation sequence. Type
IIIInnnnsssstttt>>>> ggggoooo
4. You may find that two patches have been marked as
incompatible. If this occurs, you must deselect one
of the patches.
IIIInnnnsssstttt>>>> kkkkeeeeeeeepppp ppppaaaattttcccchhhhSSSSGGGG_x_x_x_x_x_x_x
where _x_x_x_x_x_x_x is the patch number.
5. After completing the installation process, exit the
_i_n_s_t program by typing
IIIInnnnsssstttt>>>> qqqquuuuiiiitttt
To remove a patch, use the _v_e_r_s_i_o_n_s _r_e_m_o_v_e command as you
would for any other software subsystem. The removal process
reinstates the original version of software unless you have
specifically removed the patch history from your system.
vvvveeeerrrrssssiiiioooonnnnssss rrrreeeemmmmoooovvvveeee ppppaaaattttcccchhhhSSSSGGGG_x_x_x_x_x_x_x
where _x_x_x_x_x_x_x is the patch number.
- 3 -
To keep a patch but increase your disk space, use the
_v_e_r_s_i_o_n_s _r_e_m_o_v_e_h_i_s_t command to remove the patch history.
vvvveeeerrrrssssiiiioooonnnnssss rrrreeeemmmmoooovvvveeeehhhhiiiisssstttt ppppaaaattttcccchhhhSSSSGGGG_x_x_x_x_x_x_x
where _x_x_x_x_x_x_x is the patch number.